Detergent - Malmet WDS Operation, Maintenance And Installation Manual

WDS
Operation, Maintenance and Installation Manual

1. 2 DETERGENT

The 5 litre detergent container is accessed by opening the bottom door. Only use Malmet approved detergent (See
technical data for detergent details)
1. Pull handle on detergent door and open.
2. Unscrew cap and pull out with suction hose (let hose hang on detergent chamber.)
3. Remove empty bottle and replace with full bottle.
Note: Leave cap on new bottle until in position.
4. Remove cap on new bottle and fit existing hose and cap, make sure suction hose is at bottom of bottle.
5. Close detergent door.
6. Restart machine operation as normal.
7.
Check fill level indicator on display. Should show as
Note: Do not drop detergent container onto base plate. This may result in damaging the load cell.
Safety Gloves and Goggles must be worn when changing detergent. A Malmet detergent MSDS is available to
download on the Malmet website.
ISSUE 5
www.malmet.com.au
6
Page
15/03/2016