WDS
Operation, Maintenance and Installation Manual
After the door is opened display shows
LOAD
ITEMS
Then
SELECT
CYCLE
Manually press DOOR BUTTON
•
Software will check that racks are in correct position before door closes. If racks have been moved, wrong rack will
•
flash. Place rack or racks into correct position for any of the 3 cycles and press DOOR button.
Door will close and go to standby.
•
Display will show
If racks are incorrectly positioned
WRONG
RACK
If racks are in correct positions
Then
CLOSING
AFTER DOOR IS CLOSED WITHOUT RUNNING CYCLE
Display shows
OPEN
DOOR
4.2
DETERGENT WARNINGS
First Warning
When last full segment is showing. LOW DETEGENT Flashing.
At this stage there is approx 1.5 to 1.6 lt in bottle.
ISSUE 5
TO CLOSE DOOR WITHOUT RUNNING CYCLE
WRONG-RACK
OPEN-DOOR
24
Page
15/03/2016