Design Parameters; Operating Cycles - Malmet WDS Operation, Maintenance And Installation Manual

WDS
Operation, Maintenance and Installation Manual
The WDS has been designed within the following parameters
1.1

OPERATING CYCLES

Three available operating (cleaning, disinfection and sanitizing)
Urine / Bedpan
Load: capacity: 2 x Small slipper pans, 2 x Large slipper pans, 2 x Standard bed pans and 4 x Standard
Cycle:
1. Flush
2. Cold water wash
3. Hot water wash with detergent
4. Hot water rinse
5. Disinfection/Sanitizing
6. Cool down
Urine only
Load capacity:
Cycle:
1. Cold water
2. Hot water wash with detergent
3. Hot water
4. Disinfection/Sanitizing
5. Cool down
Bowl / Utensil
Load capacity:
Cycle:
1. Cold water wash
2. Hot water wash with detergent
3. Hot water rinse
4. Disinfection/ Sanitizing
5. Cool down
Note: These times do not include filling and heating. These times comply with AS 2945. See Technical data for
full cycle times.
a) Two bedpans with lid and four urine bottles can be emptied, cleaned and sanitized during each automatic cycle.
b) The cradle is designed to ensure that utensils are not dislodged during the cleaning cycle, the contents are
emptied during door closure.
c) The chamber and door are self-cleaning and do not permit water or soil to remain after a properly completed
cycle. Steam sanitizing ensures all internal surfaces are totally clean and safe.
d) The Bedpan flush cycle:
i) Removes the heavy soil
ii) Clears the trap
ISSUE 5

1.0 DESIGN PARAMETERS

male and female urine bottles
8 to 12 sec
2 min
2 min
35 sec
1 min at 90 deg
20 sec
4 x Standard male and female urine bottles
2 min
2 min
35 sec
1 min at 90 deg
20 sec
2 x Large bowls (345Dia to 305Dia), 3 x Medium bowls (240Dia to 210Dia), 6 Kidney
Dishes (sizes 300 x 50, 255 x 50 and 220 x 43 – held in kidney rack holder)
Smaller kidney dishes fit into a basket with a smaller open ended trays and utensils.
2 min
2 min
35 sec
1 min at 90 deg
20 sec
5
Page
:
15/03/2016