Safety Instructions - Malmet WDS Operation, Maintenance And Installation Manual

WDS
Operation, Maintenance and Installation Manual
WARNINGS
Be aware of 240V / 415V Voltage.
Disconnect power when servicing.
Mains power ISO switch must be in an accessible position so devise can be isolated from mains power during
service.
Be aware of steam discharge
Utensils and racks are hot to handle.
Safety gloves and goggles must be worn when changing detergent
Safety clothing with reflective tape can activate the hands free sensor when device is in standby mode.
Be aware of hot pipes and hoses from steam and hot water.
Install temperature probes and element over temperature thermal cut-outs correctly.
Not suitable for use in the presence of a flammable anaesthetic mixture with air or nitrous oxide and mode of
operation as continuous.
ISSUE 5

SAFETY INSTRUCTIONS

.
4
Page
15/03/2016