Malmet WDS Operation, Maintenance And Installation Manual page 48

WDS
Operation, Maintenance and Installation Manual
Report Start:
Report End:
Total Number of wash process Starts:
Mode=0 wash process starts:
Mode=1 wash process starts:
Mode=2 wash process starts:
Total Number Completed – Success:
Total Number Completed – Failed:
Total Number Completed – Aborted:
Mode=0 Average Wash Time:
Mode=1 Average Wash Time:
Mode=2 Average Wash Time:
Number of Power restarts:
Pump Run Hours:
Cycle – Allow selection of one or more cycles to display the prints the Records for each cycle followed by
a Signoff Footer Line
Press the Print button then shows the Print dialog window where can select the printer, preferences and
number of copies.
6.5.11 Service Button
The Service Button opens to a new window. This allows viewing of the Service Fault Report and also
uploading of system software.
The View Faults button presents a listing for each of the fault codes as shown below:
ISSUE 5
25/11/2000 13:00:21
29/05/2012 15:43:35
16
16
0
0
4
6
10
2.52 mins
0.00 mins
0.00 mins
22
0
48
Page
15/03/2016