Certifications And Compliances; Quality Policy - Malmet WDS Operation, Maintenance And Installation Manual

WDS
Operation, Maintenance and Installation Manual
Forward
In order to obtain maximum life and efficiency from your Malmet WDS and to aid in the safe operation of the device,
please read and understand this manual thoroughly and follow all instructions before operating the unit.
This device is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the unit
by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the device.
The specifications supplied in this manual were in effect at time of publication. Due to Malmet (Australia)'s policy of
continuous improvement, changes to these specifications may be made at any time without notice on the part of Malmet
(Australia).

Certifications and compliances

ARTG listed:
Electrical Safety Cert:
Watermark Cert:

Quality Policy

Malmet (Australia) Pty Ltd is Quality Certified to ISO 9001, AS 3902, NZS 9002 and guarantees the quality of this
product. Should you have any problems with your machine, contact the company from whom you purchased it, or Malmet
(Australia) Pty Ltd.
ISSUE 5
ID 232450
CS10462N
WMKA21156
Malmet (Australia) Pty Ltd
Head Office and Factory
9-11 McKay Ave
PO Box 373
LEETON NSW 2705
Telephone: (02) 6953 7677
E-mail: inquiries@malmet-aus.com.au
Web Site: www.malmet.com.au
3
Page
15/03/2016