Malmet WDS Operation, Maintenance And Installation Manual page 46

WDS
Operation, Maintenance and Installation Manual
This information is printed on the Report Headers.
To enter a new record, just start typing the data on the next new line.
Press Save when completed.
The Reference / Serial Number needs to match the Serial Number of the respective machine. This can
be viewed on the machine using Diagnostics Command '36 <Enter>'
The Machine Reference Number / Serial Number can be entered or changed with commands '36 nnnn
1892 <Enter>'
6.5.5 Changing the Report Titles
The D13447PC.ini file which resides with the C1344PC.exe can be edited with a text editor (eg Microsoft
Notepad)
If the following lines are added to the .ini file, then the title test after the "=" can be edited and changed.
When changes are made, save it with the same name ("D13447PC.ini")
[Print]
EventReportTitle=Event Report
StatisticsReportTitle=Statistics Report
CycleReportTitle=Cycle Report
6.5.6 How to Download the Log Data
Select "Download" button
If there is already data on the screen, there will be a prompt giving the option to save this data before
loading in the new data.
Next, you will see the Download options window, select the comport for the ISB port.
Deselect "Download all records" to enter the Number of records if required, otherwise leave this selected
to Download All Records
Note: Download all records could take considerable time (one or two minutes).
Press Download button to start the data transfer.
The progress number of records is shown in the lower LHS of the main window.
Once completed, the table should look something like shown in 6.5.3
6.5.7 How to Save and Open Files
The Save button allows the on screen data to be saved as CSV format file.
The Open button allows a previously saved file to be loaded and viewed on-screen.
ISSUE 5
46
Page
15/03/2016