Gamma - Canon WUX5000 User Commands

GAMMA

Gamma adjustment
Format
GAMMA=<Gamma adjustment:Number>
GET□GAMMA / ?△GAMMA
Setting values for <Gamma adjustment: Number> are -10 to 10.
Environment
Power
OFF ON PM D-RGB
X O X
Response
"i:OK" is returned if the parameter was set properly.
For ' ' or '
GET GAMMA ?GAMMA
'
g:GAMMA=<Gamma adjustment:Number>
For details on other responses, refer to the "Error List".
Description
(1) This performs the Gamma adjustment.
(2) This command functions in the same way as when "Image adjustment" - "Gamma adjustment"
are selected on the menu.
(3) If numerical parameters are outside the range, "
(4) This sets the currently selected input signal and image mode.
(5) The current gamma adjustment can be acquired using the applicable GET command. ("
")
GAMMA
Example
Setting
> GAMMA=-1
< i:OK
Reference
> GET GAMMA or ?GAMMA
< g:GAMMA=3
* Commands are indicated by ">", and responses are indicated by "<".
Input
A-RGB COMP HDMI None
-
', current gamma adjustment is returned as
'
This sets the gamma correction to -1.
This retrieves the gamma adjustment.
- 37 -
WUX5000 / WUX4000 User Commands
" is returned.
e:0801 INVALID_VALUE
GET