Checking Base Service Information; Authorisation - Gigaset sl910 Manual

Customer Service & Assistance

Checking base service information

You will need your base service information when you call our hotline.
Prerequisite: You are trying to establish an external call or are conducting an exter-
nal call.
¤
Briefly touch any point in the status bar to show the following service informa-
tion in the display.
1:
2:
3:
4:
5:
6:
7:

Authorisation

This device is intended for analogue phone lines in your network.
Country-specific requirements have been taken into consideration.
We, Gigaset Communications GmbH, declare that this device meets the essential
requirements and other relevant regulations laid down in Directive 1999/5/EC.
A copy of the 1999/5/EC Declaration of Conformity is available at this Internet
address:
www.gigaset.com/docs
Please note
Signs of wear on the display and metal frame are excluded from the warranty.
82
Serial number of the base (RFPI)
IPUI (5-byte hexadecimal code)
Informs the service employees of the capacities of the base
Variant (digits 1 to 2),
Version of the phone's firmware (digits 3 to 5).
Device number of the base. This contains additional information for
the service employee.
Working hours counter, time of the last reset
Programming instruction ID