Receiving A Vcard With Bluetooth; Adding A Displayed Number To The Directory; Copying A Number From The Directory; Reminder Call On An Anniversary - Gigaset sl910 Manual

Using the directory

Receiving a vCard with Bluetooth

Prerequisite: The handset is in idle status. Bluetooth is activated.
¤
If the sender is in the Known Devices (
ically.
¤
If the sender is not in the Known Devices list, enter the sender's device PIN and
touch è.
To use the phone numbers, country and area codes must be stored in the directory
¢
( page 68).

Adding a displayed number to the directory

You can copy numbers displayed in a list, e.g., the call list, the redial list or in an SMS
to the directory. You can also copy numbers that you have just dialled or entered for
dialling.
¤
Touch [
– Create a new entry (
the entry with number type Home.
– Add a number to an existing entry:
Select an entry.
Or
Select the number you want to overwrite.

Copying a number from the directory

¤
Depending on the operating situation, open the directory with [ œ Contacts]
or œ.
¤
Touch a directory entry to copy its default number.
Or:
Touch the ' next to the entry and then touch the number to be copied.

Reminder call on an anniversary

A reminder call is signalled in idle status. You have the following options:
¤
Touch Write Text Message or
¤
Touch Off to acknowledge the reminder call and to exit.
When you are on the phone, a reminder call is indicated on the handset with a sin-
gle advisory tone.
Anniversaries that are indicated during a call and anniversaries that are not
acknowledged are entered in the list of missed appointments (
48
¬
Copy Number] or [Copy to Directory]. You can:
¢
page 45): The number is copied as the first number of
¤
Touch Add
¢
page 55) list, receipt occurs automat-
¤
Touch Yes.
¢
page 42).