Accessing Additional Functions Via The Pc Interface - Gigaset sl910 Manual

Accessing additional functions via the PC interface

Bluetooth
Radio frequency range
Transmission power
Pin connections on the telephone jack
3
2
1
Accessing additional functions via the PC interface
To enable your handset to communicate with a PC, the "Gigaset QuickSync" pro-
gram must be installed on your PC (free to download and more information at
www.gigaset.com/gigasetSL910).
Using this program, you can update the handset's firmware using a USB connection
between the PC and handset (
Using Bluetooth (
accept calls on the handset and load caller pictures, screensavers and sounds/ring-
tones in the following formats from the PC to your handset.
Sound
– Ringtones
– Imported sounds
Picture
– Caller picture
– Screensaver
Please note
u
If the USB data cable is plugged in, a Bluetooth connection cannot be estab-
lished. If it is plugged in during an existing Bluetooth connection, this is can-
celled.
u
Using a USB connection with a power supply of 500 mA. the handset's bat-
tery is charged.
On USB connections with lower charging currents, the handset's battery
is discharged!
A detailed description can be found in the help file to Gigaset QuickSync.
86
1 unused
4
2 unused
5
3 a
6
4 b
5 unused
6 unused
¢
page 6).
¢
page 54) or a USB connection, you can initiate calls on the PC,
Format
Internal
WMA, MP3, WAV
BMP, JPG, GIF
320 x 225 pixels
320 x 480 pixels
2402–2480 MHz
4 mW pulse power