Gigaset sl910 Manual page 57

Starting the search
The search is started when you open the Bluetooth submenu under Settings and
Bluetooth is activated.
¤
Open the Devices found list: Touch ' to the right of the list (see picture above).
Trusting the device
¤
Select the device from the Devices found list.
¤
If necessary, enter the PIN of the device to be registered.
PIN for a data device: Enter any PIN on the handset and then also on the data
device.
PIN for a headset: In general, 0000 is preset. For this reason, you only need to enter
the PIN in exceptional cases.
If the Known Devices already contains 6 entries, the last entry is overwritten.
Exception: The headset only overwrites a headset.
Ending the search
¤
Close the Bluetooth submenu (touch ') or deactivate Bluetooth.
Editing the list of known (trusted) devices
Opening the list
¤
In the Bluetooth submenu, touch ' next to Known Devices.
A ô next to the device name in the list indicates a headset and * indicates a data
device.
Viewing device information, deregistering a device
¤
Open the Known Devices list.
Changing the name of a device
¤
Open the Known Devices list.
¤
If necessary, delete the previous name with
Use è to confirm.
¤
Rejecting/accepting an unregistered Bluetooth device
If an unknown Bluetooth device tries to establish a connection, you will be asked to
enter the device PIN (bonding).
¤
Reject: Touch '.
¤
Accept: Enter the device's PIN.
Add to the Known Devices list: Touch Yes.
Temporarily use device: Touch No.
Changing the Bluetooth name of the handset
¤
In the Bluetooth submenu, touch ' next to Own Device.
the previous name with
¤
adding the device to the known devices list
¤
Select device.
¤
Select device.
Confirm with è.
¤
¤
ç
. Enter the new name.
Using Bluetooth devices
Touch [ ÿ Trust Device].
¤
Confirm with è.
¤
¤ ü
Touch [ Delete].
¤
Touch the device name.
ç ¤
. Enter the name.
¤
If necessary, delete
Confirm with è.
¤
55