Extracting Data From Can Bus; Representation: Byte - Bosch MS 6 Manual

7 | CAN Configuration
7.2.4
60 / 78

Extracting data from CAN bus

Representation: Byte

Some CAN devices need to be addressed by a byte represented CAN channel.
The address can be assigned in this window and is illustrated by a bargraph.
a)
b)
c)
d)
e)
a) Enter the name of the CAN-channel.
b) Enter CAN message ID. Check the box, if extended IDs (29 bit) are used.
c) If replacement values are used, specify time-out period and raw value.
d) Check the box, if a multiplexer (row counter) is used.
e) Enter data position, length and format.
f) The bargraph shows assignment of the bytes.
- Red colored fields show the assignment of the data bytes.
- Orange colored fields show the assignment of the multiplexer bytes.
ECU MS 6 Bosch Motorsport