The Procedure For Correct Adjustment Of The Trigger Wheel; Procedure To Find The Right Position For The Crank And Cam Trigger - Bosch MS 6 Manual

Bosch Motorsport

The procedure for correct adjustment of the trigger wheel

Procedure to find the right position for the crank and cam trigger:

1. Rotate the engine to the precise position of TDC compression for cylinder #1.
2. Rotate the engine 78 crankshaft degrees backwards.
3. Adjust the position of the crank trigger wheel in reference to its inductive
speed sensor: the longitudinal axis of the sensor must point exactly towards
the reference mark (2
4. Rotate the engine further 15 crankshaft degrees backwards.
5. Adjust the position of the cam trigger in reference to its Hall effect speed
sensor: the sensor must be at the begin of the tooth.
ECU MS 6
falling edge after the gap).
nd
Technical Data | 2
21 / 78