Connections - Onkyo C-755 Instruction Manual

Connecting the CD Player-Continued

Connections

With (Remote Interactive) you can control the
C-755 together with your other
Onkyo AV components. With some Onkyo AV
receivers you can use one remote controller to con-
trol all your Onkyo components and use the follow-
ing special functions:
Direct Change
If your C-755 is connected to an
Onkyo hi-fi amp or AV receiver, when you start play-
back on the C-755, the AV receiver will select the
C-755 as the input source.
Remote Control Operation
You can control the C-755 by using your Onkyo
amplifier's remote controller. See the amplifier's
instruction manual for details.
To use
(RCA/phono) between the C-755 and your other Onkyo
component even if they are connected digitally.
RCA/phono audio cable (not supplied)
14
En-
-compatible
-compatible
you must make an analog audio connection
Coaxial cable (supplied)
L
CD
Onkyo Hi-fi amp, AV receiver
To use the
the C-755's
another AV component in your system by using the
supplied
See the manuals supplied with your other
patible AV components for more information.
Notes:
• Use only
• The C-755 has two
nect either one to your Onkyo hi-fi amp or AV
receiver. The other connector is for connecting
additional
• Connect the C-755's
AV components. Connecting to other manufac-
turer's AV components may cause them to mal-
function.
• Some Onkyo
may not support the special functions described
here.
cable (supplied)
R
Coaxial IN
functions, you need to connect one of
connectors to an
cable.
cables for

connections.

connectors. You can con-
-compatible components.
connector only to Onkyo
-compatible AV components
Disconnect the power
cord before making any
connections!
connector on
-com-