If Connecting An External Sensor - Panasonic VL-SWD501 Installation Manual

Installing Wireless Sensor Cameras
Installing Wireless Sensor Cameras

If connecting an external sensor

Step 3 Connect wires to the external input terminal.
1
Strip the wires.
2
Remove the water-resistant rubber (3) from the
wireless sensor camera and attach it to the wires.
3
Connect the wires to the terminals (4) and reattach
the water-resistant rubber and secure it in its original
position
•Insert the wires while pressing the terminal buttons with
the tip of a screwdriver.
Step 4 Close the cover (push closed until it clicks).
Step 5 Attach the wireless sensor camera to the
wall mount bracket and secure it.
•After attaching the 4 screws, attach the
screw covers.
32 mm
12 mm
Screws
Screw covers
(4)
(3)