Table of Contents
Advertisement
Door Station
Door Station
Installing the door station
(VL-V554EX)
Step 1
Attach the mounting base to the wall
securely.
Mounting base
Screws x 2 *
locally procured)
• Install the mounting base on a vertical flat wall.
Installation
Installation
83.5
mm
Wall
Wire
Step 2
Use a hex wrench to loosen screw A and
remove the front panel of the door station.
Front panel
Screw A
Step 3
Connect the wires
<Rear view>
Terminal for the
main monitor station
1
Loosen the screws.
2
Push in the wires to the terminal connectors
(non-polar), then tighten the screws.
2 mm hex wrench
Terminals for the
electric locks
Hide quick links:
Advertisement
Table of Contents
