Table of Contents
Advertisement
Installing Wireless Sensor Cameras
Installing Wireless Sensor Cameras
Install the wireless sensor camera
Step 2
Open the cover on the rear and connect the DC cable.
1
Open the cover.
Cover
2
Strip the DC cable.
32 mm
12 mm
Lift the tab
to open the
cover
3
Remove the water-resistant rubber (1) from the wireless
sensor camera and attach it to the DC cable.
Pass the DC cable through the
recessed area of the water-
resistant rubber and attach the
cable.
Water-resistant
rubber
4
Loosen the screws (2) and push in the wires of the DC
cable to the terminal connectors (non-polar), then
tighten the screws.
• Secure the water-resistant rubber attached to the cable
to its original position.
(2)
(1)
Hide quick links:
Advertisement
Table of Contents
