Installing The Power Supply Unit (Vl-Ps241) - Panasonic VL-SWD501 Installation Manual

Power Supply Unit
Power Supply Unit
Installing the power supply unit (VL-PS240)
How to connect the power cable (AC/DC)
Connect the power supply unit and AC/DC cables.
Step 1
Strip the AC/DC cables as follows:
〈AC cable〉
45 mm
7 mm
〈DC cable〉
25 mm
7 mm
Step 2
Remove the screws (2) and then remove
the cable covers (1).
Installation
Installation
Power supply unit
(with cable covers removed)
〈Top view〉
AC cable
binder hole
AC IN terminal
〈Bottom view〉
DC cable
binder hole
DC OUT terminal
Step 3 Connect the AC/DC cable to the AC IN
terminal/DC OUT terminal on the top and
bottom of the power supply unit, and then
secure the wires by tightening the screws.
*1
AC cable
Screws
DC cable
*1
Cable binders
Step 4
Use the cable binders to secure the AC/DC
cables (double-coated area) to the power
supply unit.
Step 5
Make sure to replace the cable covers (1).
Screws (2)
Cable covers (1)
*1 Make sure that there are no bare
wires exposed outside the product.