Door Station
Door Station
Installing the door station
(VL-V554UEX)
Step 1
Install the flush mounting box in the wall.
Flush mounting box
*1
Knockout hole
*1 Only open the knockout holes as required for
the wiring.
Installation
Installation
100mm
151mm
37mm
Step 2
Use a hex wrench to loosen screw A and
remove the front panel of the door station.
Front panel
Screw A
Connect the wires
Step 3
<Rear view>
Terminal for the
main monitor station
1
Loosen the screws.
2
Push in the wires to the terminal connectors
(non-polar), then tighten the screws.
2 mm hex wrench
Terminal for the
electric lock