Power Supply Unit Installation - Panasonic VL-SWD501 Installation Manual

Power Supply Unit
Power Supply Unit
Installing the power supply unit (VL-PS240)

About the installation location
• The device must be installed inside an electrical panel or cabinet.
• A readily accessible disconnect device shall be incorporated external to the equipment.

Precautions for wiring
• Make sure you turn off the power at the breaker before performing any wiring work.
• Always connect AC or DC cables to the appropriate connection terminals. Incorrectly connecting
the AC or DC cables may damage the power supply unit.
• To prevent the power cables from disconnecting and to prevent electric shock, secure the power
cables using the cable binders and attach the cable covers.
Attach to the DIN rail
Attach in the order described below so
that hook (b) is positioned at the bottom.
Step 1
Hang hook (a) on the DIN rail (1).
Step 2 Pull and hold the lever down (2).
Step 3
Secure hook (b) to the DIN rail (3).
Installation
Installation
Hook (a)
Hook (b)
(1)
(3)
(2)