Installation Location For The Wireless Sensor Camera - Panasonic VL-SWD501 Installation Manual

Installation location for the wireless sensor camera

Installation location for the wireless sensor camera
If your Video Intercom System includes a sub monitor, it can be used to easily check the signal status.
(If there is no sub monitor, use a camera.)
■Using the sub monitor to confirm
By taking the sub monitor to the installation site, you can confirm the signal status on the sub monitor's screen.
Sub monitor signal condition
Strong
■Using the camera to confirm
Temporarily connect the camera and the power supply unit to turn on the camera, and then register it to the main monitor.
Later, you can take the camera to the installation site and confirm the signal status using the camera's indicator lamp.
Camera signal status
a wireless sensor camera in a location where objects enter from side
* Install
This will allow it to better detect the heat of the moving object.
Install within this range
Strong
Lit
Green Orange
Week
Lit Lit
Red
Install within this range
Week Out of range
Out of range
Flashing
Red
.