Installing The Door Station - Panasonic VL-G201 Installation And Operation Manual

Introduction and Installation

Installing the door station

Make sure to install the door station on a flat, vertical wall.
Important:
L On the bottom surface of the door station, there is a hole to allow water to drain. Do
not cover it up when installing.
1
Unscrew the hex-head screw using the longer end of the allen key and remove the
mounting bracket from the rear of the door station.
L The pin hole camera is not a screw to be touched or removed.
Pin hole camera
16
Hex-head screw
(Attached to the door station)
Allen key
Mounting bracket