Chapter 6
| Switch Management
Understanding the System Status LEDs
Understanding the System Status LEDs
The switch includes a display panel of key system LED indicators. The LEDs, which
are located on the front panel, are shown below and described in the following
table.
Figure 20: System Status LEDs
1
System Status LEDs
(
Table 9: System Status LEDs
LED
Condition
PWR
On Green
Off
DIAG
On Green
(Diagnostic)
On Amber
Blinking Amber
Blinking Green
PoE Status
On Amber
Blinking Amber
Off
Status
Internal power operating normally.
No AC power is connected or the internal power supply
has failed.
The system diagnostic test has completed successfully.
System diagnostic in progress.
The system self-diagnostic test has detected a fault.
The switch system is booting up.
Port LEDs display the individual port's PoE status.
The PoE device power draw on the switch has reached at
least 95 percent of the maximum switch power output
capacity.
Port LEDs display the individual port's link and activity
status.
– 42 –
1