Table of Contents
Advertisement
5. Logon to Console
Once the terminal is connected to the device, power on the Industrial Managed
Switch and the terminal will display "running testing procedures".
Then, the following message asks to log-in user name and password. The factory
default user name and password are shown as follows and the login screen in
Figure 5-1 appears.
Username: admin
Password: admin
Figure 5-1: Industrial Managed Switch Console Login Screen
The user can now enter commands to manage the Industrial Managed Switch. For
a detailed description of the commands, please refer to the following chapters.
1. For security reason, please change and memorize the new
password after this first setup.
2. Only accept command in lowercase letter under console
Note
interface.
7
Advertisement
Table of Contents
