Logging On To The Console - Planet IGS-6325 DIN rail Series Quick Installation Manual

4.1 Logging on to the Console

Once the terminal has been connected to the device, power on the Industrial
Managed Switch and the terminal will display "running testing procedures".
The following console screen is based on the IGS-6325-16P4S.
The display of the IGS-6325 series is the same as that of the IGS-
6325-16P4S.
Note
Then, the following message asks to log in user name and password. The factory
default user name and password are shown as follows as the login screen in Figure
4-1 appears
User Name: admin
Password: admin
The user can now enter commands to manage the Industrial Managed Switch. For
a detailed description of the commands, please refer to the following chapters.
1. For security reason, please change and memorize the new
password after this first setup.
2. Only accept command in lowercase letter under console inter-
Note
face.
Figure 4-1: Console Login Screen
9