Logon To The Console - Planet MGSW-28240F Quick Installation Manual

5. Logon to the Console

Once the terminal has been connected to the device, power on the Managed Switch
and the terminal will display "running testing procedures".
Then, the following message asks for the login username and password. The
factory default username and password are admin as the following and the login
screen in Figure 5-1 appears.
Username: admin
Password: admin
Figure 5-1: MGSW-28240F Managed Switch Console Login Screen
1. F or security reason, please change and memorize the new pass-
word after this first setup.
2. O nly accept command in lowercase letter under console inter-
Note
face.
7