Logon To The Console - Planet WGS3-24000 Quick Installation Manual

4. Logon to the Console

Once the terminal has connected to the device, power on the WGS3 Layer 3
Switch, the terminal will display that it is running testing procedures.
Then, the following message asks the login user name and password. The factory
default user name and password as following, and the login screen in figure 4-1
appears.
User name: admin
Password: admin
Figure 4-1 WGS3 Layer 3 Switch Console Login screen
1. For security reason, please change and memorize the new
password after this first setup.
2. Only accept command in lowercase letter under console
Note
interface.
6