Table of Contents
Advertisement
MN001824A01-AT
Chapter 7: Advanced Features
4. Release PTT to listen.
Result:
7.10
Emergency Operation
The Emergency feature is used to indicate a critical situation. An emergency signal overrides any other
communication over the selected channel.
Your radio supports the following Emergency modes:
●
Emergency Alarm
●
Emergency Call
●
Emergency Alarm with Emergency Call
3
●
Silent Emergency
Alarm
Only one Emergency mode can be assigned to the Emergency button.
Your radio is also programmed to operate in one of the following conditions:
Tactical/Non-Revert
The radio sends an emergency alarm and/or makes an emergency call on the current channel.
Non-Tactical/Revert for Conventional System
The radio reverts to the programmed emergency channel to send an alarm and/or make an emergency
call.
Non-Tactical/Revert for Trunking System
The radio reverts to the programmed emergency talkgroup (trunking system) or channel (conventional
system) to send an alarm and/or make an emergency call.
Fall Alert (Man Down) is an alternate way to activate the Emergency feature. For more information, see
Down (Fall Alert) on page
For more information, contact your system administrator.
7.10.1
Special Considerations for Emergency Operation
The following scenarios apply during Emergency operation:
Table 7: Emergency Operation Scenarios
Scenario
If you press the Emergency button while in a
channel that has no Emergency capability,
If you change to a channel or mode with no Emer-
gency capability while in Emergency operation,
3
This feature allows you to send an Emergency Alarm to the system without triggering any audio or visual
indicators.
68
74.
Outcome
a tone sounds.
your radio shows the following indications:
●
A tone sounds until you select a valid Emer-
gency channel or mode, or until you disable the
Emergency operation.
●
The display for Model 3.5 and Model 2.5 shows
No emergency.
Man
Advertisement
Table of Contents
