Table of Contents
Advertisement
low-pitched tone. The display shows <Device
Type> CON FAIL.
•
If the connection fails within 6 seconds, you hear a
decremental-pitched tone to indicate that the
device is unpaired. The display shows <Device
Type> UNPAIRED.
Turning Bluetooth Visibility On
Turning Bluetooth visibility to on enables other
Bluetooth devices to search for your radio. The
visibility of the Bluetooth is set to off by default.
Turn Bluetooth visibility on via the preprogrammed
button.
a) Press and hold the preprogrammed Bluetooth
Inquiry On/ Off button for three seconds to
enable the Bluetooth visibility feature.
One of the following scenarios occurs:
•
Keep holding the button although you hear
a short, medium-pitched tone with the
display shows momentary VISIBLE.
indicates the visibility is turned on
successfully.
74
2
Releasing the preprogrammed button turns off the Visibility mode.
English
•
•
Receiving Pairing Request from other Devices
Turn on your radio Bluetooth Visible mode.
Your radio automatically accept the request and
pair with any request received from other device.
Turning On the Bluetooth Audio (Routing the Audio
from the Radio to the Headset)
Turning on the Bluetooth audio via the
preprogrammed button:
a) Press the preprogrammed Bluetooth Audio
Reroute button to route the audio from the
radio to the headset.
A short, medium-pitched tone sounds. The
[2]
This
display shows HDSET ON.
If the visibility fails to turn on, the display
shows VISIBLTYFAILED.
When the timer expires, the display shows
VISI OFF.
Advertisement
Table of Contents
