Receiving Pairing Request From Other Devices; Turning The Bluetooth Audio On (Routing The Audio From The Radio To The Headset); Turning The Bluetooth Audio Off (Routing The Audio From The Headset To The Radio); Adjusting The Volume Of The Radio From Bluetooth Audio Device - Motorola APX 7000XE 1 User Manual

2
Keep holding the button although you hear a short, medium-
pitched tone with the display shows momentary VISIBLE.*
OR
If the visibility fails to turn on, the display shows
VISIBLTYFAILED. Repeat step 1.
OR
When the timer expires, the display shows VISI OFF.
*Releasing the preprogrammed button turns off the Vibility
mode.


Receiving Pairing Request from other Devices

Procedure:
With the Visible mode ON, your radio automatically accept the
request and pair with any request received from other device.

Turning the Bluetooth Audio On (Routing the
Audio from the Radio to the Headset)
Procedure:
1
Press the preprogrammed Bluetooth Audio Reroute
button to route the audio from the radio to the headset.
2
A short, medium-pitched tone sounds. The display shows
HDSET ON.

Turning the Bluetooth Audio Off (Routing the
Audio from the Headset to the Radio)
Procedure:
1
Press the preprogrammed Bluetooth Audio Reroute
button to route the audio from the headset to the radio.
2
A short, medium-pitched tone sounds. The display shows
SPKR ON.

Adjusting the Volume of the Radio from Bluetooth
Audio Device
Your radio can only control the volume of MCW and OCW
Bluetooth enabled audio device. If the radio is paired with other
Bluetooth enabled audio device, its volume is independent from
the APX radio. In this case, the volume is only adjustable on the
device.
Procedure:
With the Bluetooth audio device connected to the radio:
1
Adjust volume up/down on the bluetooth audio device.
The radio display shows VOL XX and sounds a short,
2
medium-pitched tone.
55
English