Pro-Form LE TOUR DE FRANCE User Manual page 8

3. If there are shipping screws in the Rear
Stabilizer (23), remove and discard them.
Attach the Rear Stabilizer (23) to the Base (1)
with two M10 x 58mm Screws (74).
4. Using a plastic bag to keep your fingers clean,
apply some of the included grease to the sides
of the channel on the top of the Saddle Post (3).
Next, orient the Saddle Post (3) so that the
height indicators (B) are on the side shown.
Loosen the indicated Adjustment Screw (47),
and insert the Saddle Post (3) into the Frame (2).
Move the Saddle Post (3) upward or downward
to the desired position, and then tighten the
Adjustment Screw (47).
3
74
4
Grease
3
47
8
1
23
B
2