Pro-Form LE TOUR DE FRANCE User Manual page 24

HOW TO CHANGE CONSOLE SETTINGS
The console features a settings mode that allows you
to view usage information, to personalize console set-
tings, and to set up and manage a wireless network
connection.
1. Select the settings mode.
To select the settings mode, press the Settings but-
ton. The settings mode will appear in the display.
The time display will show the total number of
hours that the training bike has been used.
The distance display will show the total number of
miles (or kilometers) that have been pedaled on the
training bike.
2. Navigate the settings mode menu.
The matrix will display a menu of the settings mode
options.
Press the increase and decrease buttons near the
Enter button to highlight the desired option.
The lower part of the matrix will display instructions
for the highlighted option. Make sure to follow the
instructions displayed in the lower part of the
matrix.
3. Change settings as desired.
IP Address—An IP address will appear in the
matrix. Note: This IP address is for reference.
Demo—The console features a display demo
mode, designed to be used if the training bike
is displayed in a store. While the demo mode is
turned on, the display will not enter sleep mode
when the training bike is not in use. If the demo
mode is turned on, the word ON will appear in the
matrix. To turn on or turn off the demo mode, press
the Enter button.
Units—The selected unit of measurement will
appear in the matrix. To change the unit of mea-
surement, press the Enter button. To view distance
in miles, select ENGLISH. To view distance in
kilometers, select METRIC.
Contrast—The contrast level of the display will
appear in the matrix. Press the volume increase
and decrease buttons to adjust the contrast level.
Firmware Update—For the best results,
regularly check for firmware updates.
Note: The matrix will display NOT CONNECTED if
the console is not connected to a wireless network.
Press the Enter button to check for firmware
updates using your wireless network. If an update
is available, the update will begin automatically.
IMPORTANT: To avoid damaging the training
bike, do not unplug the power cord while the
firmware is being updated. The update may
take several minutes.
Note: Occasionally, a firmware update may cause
your console to function slightly differently. These
updates are always designed to improve your exer-
cise experience.
Default Settings—To restore the console to its
factory default settings, press the Enter button.
Note: The console will erase any information that
you have saved in its memory.
The WiFi–Normal option will allow you to set up
a wireless network connection using the console.
See step 4 for instructions.
The WiFi–Advanced option will allow you to set up
a wireless network connection using your com-
puter, smart phone, tablet, or other Wi-Fi device.
See step 5 for instructions.
iFit User Setup—To set up a different iFit account,
but maintain the existing wireless connection,
follow the instructions in the matrix. Note: This
option will be used rarely.
Clear WiFi—To erase the console's wireless
network settings and have it forget the currently
selected wireless network, follow the instructions in
the matrix.
24