Pro-Form LE TOUR DE FRANCE User Manual page 25

The Front Gear and Rear Gear options will allow
you to set up the gearing on the training bike to
simulate a variety of gearing options used on road
bikes.
IMPORTANT: For detailed information about
gearing options, consult a road cycling book or
other road cycling resource.
Front Gear—Press the Enter button repeatedly to
select the desired front gearing option for the train-
ing bike.
Rear Gear—Press the Enter button repeatedly to
select the desired rear gearing option for the train-
ing bike.
Incline Lock—The console features an incline
lock that will prevent the training bike from inclining
or declining. To turn on or turn off the incline lock,
press the Enter button.
Note: If you use a Le Tour de France workout
when the incline lock is turned on, the resistance of
the pedals will change to match the programmed
incline levels for the workout.
4. Use WiFi–Normal to set up a wireless
connection.
This option will allow you to set up a wireless
network connection using the console.
Note: You will need to know your network name
(SSID). If your network has a password, you will
also need to know the password.
To set up a wireless network connection using the
console, first press the Enter button.
IMPORTANT:
Set the
included WiFi
setup card on
the console.
The buttons
on the WiFi
setup card
are refer-
enced in the
following
instructions.
Card
A list of networks will appear in the matrix. Press
the up and down buttons to highlight the desired
network. Then, press the Enter button. Note: Do
not select IFIT_SETUP.
Note: The time display will show the number of
the currently-selected access point. The distance
display will show the total number of access points
detected.
If the network has a password, enter the password.
A keyboard will appear in the matrix. As necessary,
press the buttons on the WiFi setup card to select
the caps option, the number option, or the symbol
option.
Press the up, down, left, and right buttons to high-
light the desired letter or number. Then, press the
Enter button to select the letter, number, or symbol.
When you have finished entering the password,
press the Done button.
Next, a numerical code and a web address will
appear in the matrix.
Open a web browser on your computer, smart
phone, tablet, or other internet-compatible device
and go to the web address.
Log in to your iFit account on the web page. Then,
enter the numerical code into the indicated field on
the web page. Follow any other instructions on the
web page.
Then, unplug the power cord, wait for several
seconds, and then plug in the power cord again.
Note: It may take a few minutes for the console to
be ready for use.
When the console is connected to a wireless
network, the wireless symbol in the display will
stop flashing and become solid. The wireless sym-
bol will show the strength of your wireless signal;
four arcs indicate full signal strength.
If you cannot complete any part of this
process, or if you have any questions, go to
http://support.ifit.com for assistance.
25