Department Groups - NEC XN120 User Manual

Expansion unit
Hide thumbs Also See for XN120:
Table of Contents

Advertisement

Department Groups

You may want to change this setting if:
·
You have people that work within a group and you want to be able to call anyone within the group. The
call will ring at anyone that is available within the group. If they do not answer, the call will step to the
next member.
Call to a
Department
Group
System Operation:
The telephones are placed into Department groups. There are 32 groups available.
The group is given a number (pilot number) that you dial to reach the group.
You can choose the following options for each group.
·
How the calls will ring around the group – either in a set order of priority or randomly at any telephone.
·
Try each telephone once or keep hunting – your call can ring at each available telephone in the group and
if not answered stay at the last member or keep trying each member.
·
How long each member rings before the call will step on to the next one available.
Program 16-02-01
Place the telephones into a
department group.
A telephone can be a member
of one group.
Priority is in order 1-99 (high-
low)
XN120 Expansion Unit Guide
Default Setting:
All telephones are in department group 1
16-02-01 TEL 200
Extension Grp
Ø For each telephone enter the group number (1-32) that it is a
member of, you can overwrite the current entry.
Ø Press HOLD to confirm the entry and step to the priority
option.
16-02-02 TEL 200
Priority
Ø For each telephone enter the priority number (1-99), you can
overwrite the current entry.
Ø Press HOLD to confirm the entry and step to the next
telephone.
Ø Press DC several times when you are done to return to the
Program Mode.
Ø (Press SPK to save changes and exit if you are finished).
Configure the Expansion Unit
1
1
Press Vol p q
to select the
telephone
number
Press Vol p q
to select the
telephone
number
35

Advertisement

Table of Contents
loading

Table of Contents