File Resolution; File Name; Mirror Options; Format Mirror Card - Zaxcom Nomad User Manual

Nomad portable multitrack digital audio mixer recorder

Hide thumbs Also See for Nomad:

Table of Contents

MAIN MENU

File Resolution

Sets the bit depth that Nomad will mirror files as.

Sets the way your individual files are named.

• Z001001 – is the default way where the file name consists of the Folder Name (Z001 or whatever name you

create) followed by the Segment Number (001).

• 1 T2 Z001 – creates a file name in the format of "Scene Take Folder Name SegmentNumber".

For example if you record Scene is "1", Take "2" in folder "Z001" and the segment number is "2", the file name is

"1_T2_Z0012.WAV".

If the Folder Name is changed, "Z001" will be replaced with the new name of the folder.

IMPORTANT: Be careful not to create any Scene and Take text with characters other than letters or numbers

with the second file naming option

This setting allows Nomad to stay in mirror mode after it has been powered off. If this option is set to OFF, any time

Nomad is powered down it changes the MIRROR MODE to OFF.

IMPORTANT: If Nomad is setup to allow Mirroring mode to be remembered after a power cycle - if a CF card is not

installed in the Mirror slot after the unit boots-up, mirror mode will be turned off and must be manually turned on by

the user when a Mirror Card is inserted.

This menu is used to format the Mirror CF card. Nomad will format the card as a FAT32 format.

Recording Setup / Mirror Card

Table of Contents

Do you have a question about the Nomad and is the answer not in the manual?