Meter Peak Hold; Punch-In; Pfl Routing - Zaxcom Nomad User Manual

MAIN MENU

Meter Peak Hold

This sets the duration the peak indicator is held. The range is 400MS – 8000MS with a step value of 200MS.

Punch-In

This item allows the user to turn ON/OFF the ability to start a new segment while recording. If it is
create a new file while recording by pressing (or holding) the REC key (depending if you are in shifted or unshifted
mode). If it is DISABLED, you cannot manually create a new file while recording.
If you turn on the Rec/Stop warning option in the ENG Home screen, there will be an audible beep when a new file is
created. The beep is heard in the main headphones only.
NOTE: Regardless of this setting Nomad will create a new file when the current file reaches 2GB in size.

PFL Routing

This sets what will be listened to when the PFL key is pushed.
• FADER – the PFL is listening to whatever that fader is controlling. The fader is set in the
AES inputs.
• ANALOG – the PFL is listening to the corresponding analog input.
34
Mode Settings
, you can
ALLOWED
Fader Assign page including