Trend Buffer - Honeywell Excel 50 User Manual

EN2B-0137GE51 R0216
Remote Login
< >
controller
< >
controller
< >
controller
Using the arrow keys, move the cursor to the controller you want to log into. Confirm
with ENTER.
IMPORTANT:
From now on, all visible screens are the screens of the remote controller.
The first screen of the remote controller will be the start screen. You can
now access all screens of the remote controller. Use the 'Buswide Access'
function via the 'Data Points / Parameters' fast-access key to return to the
screens of your own controller. Use the LOGOFF function or select your
own controller in the controller list of the LOGIN function. If you do not
press a key for 10 min, you will also be logged off. You will return to the
controller list screen of the LOGIN function on your own controller.
Logging in to a controller that uses an XI581/582 operator interface results
in only part of the information from that controller being displayed on the
Excel 50 screen (due to its smaller screen size).
If 'LOGOFF' has been selected, you will be logged off from the remote controller and
return to the controller list screen of the LOGIN function on your own controller.
If 'ON' or 'OFF' has been selected, alarms from remote controllers will be displayed
or suppressed. The screen will remain the same and no changes are visible.

›Trend Buffer

›Flash EPROM
›BACK
Using the arrow keys, move the cursor to the 'Trend Buffer' field. Confirm with
ENTER.
›<
>
user addr.
›<
>
user addr.
›<
>
user addr.
›<
>
user addr.
Using the arrow keys, move the cursor to the appropriate data point. Confirm with
ENTER.
< > <
user addr. unit
< > <
time value
< > <
time value
< > <
time value
In this screen, the trend buffer entries for the data point can be viewed using the
normal methods for moving through a list box.
Return to the list under 'Points in Trend' with CANCEL.
42
EXCEL 50 - USER GUIDE

1


1

>

> 1
>
>

Trend Buffer