System Time; Setting Date And Time - Honeywell Excel 50 User Manual

EXCEL 50 - USER GUIDE

System Time

The 'System Time' procedure is used to make changes to the time and the date
which the Excel 50 controller uses for its control programs. Use the 'Daylight saving'
function instead of the 'Date / Time' function to change the time in spring and
autumn.
›System Time
›Daily
›Weekly
›Annual
Using the arrow keys, move the cursor to the 'System Time' field. Confirm with
ENTER.
System Time
›Date / Time
›Daylight Saving
Using the arrow keys, move the cursor to the 'Date / Time' field. Confirm with
ENTER. The following screen appears.
System Time
Date: ›13.06.2009
Time: ›10:28
›BACK
Using the arrow keys, move the cursor to the 'Date' or 'Time' field. Confirm with
ENTER.
System Time
Date: ›23.06.2009
Time: ›10:28
›BACK
If 'Date' is selected:
Set the date using the '+' or '–' keys. Use the arrow keys to move from field to field.
Confirm with ENTER. Use the arrow keys to move the cursor to 'BACK'. Confirm
with ENTER to return to the previous screen.
NOTE: The date must be entered in the format determined by the Engineering
Units: for example, 23. July 2009 must be entered as 23.07.2009 for
Europe and 07/23/2009 for the US. Press the CANCEL key to abort the
operation or to cancel an incorrect entry before ENTER has been pressed.
The value previously displayed will be restored.
15

Setting Date and Time

EN2B-0137GE51 R0216