Changing The Language; Set Time And Date; Matching Coding Addresses To The System Version - Viessmann vitotronic 200-h Installation And Service Instructions Manual

Vitotronic 200-H, HK1B Installation and Service

Changing the Language

Set Time and Date

Matching Coding Addresses to the System Version

At the commissioning stage, the display is in German.
1. "Sprache" (Language) Deutsch DE (German)
2. Select the required language with
3. Accept by pressing OK.
To change the language
Extended menu:
1.
2. "Settings"
3. "Language"
4. Select the required language with
5. Accept by pressing OK.
Setting the time and date
During commissioning.
1. Using the set the current time
2. Accept by pressing OK, this will move to date
3. Using the set the current date
4. Press OK to complete
To change the time/date after prolonged time out of use.
Extended menu:
1.
2. "Settings"
3. "Time / Date"
4. Set current time and date (as shown above).
Check all addresses in Code 1 and adjust if required.
Check the following coding addresses and adjust
accordingly in Code 2:
"4C" Function plug sÖ M1
"4E" Function plug gS M1
Commissioning
27