System set-up
In the system setup-menu you define
specific system parameters, normally only
once. Touch the system-menu touch field
(left down below) and select the respective
parameters in order to adjust them.
Language
Determine the language by the
flag-symbol..
Display-brightness
The slide control enables you to adjust the
display-brightness infinitely variable.
Starting mode
Select one of the three modes: automatic
control, semi automatic control or manu-
al control. The Commander boots up in the
respective starting mode.
Protocols
Choose the data format. The Commander
is designed for the Märklin-Motorola data
format old and new as well as for the data
Viessmann Commander
format of the NMRA-DCC system. A hybrid
exploitation of both protocols is possible.
Model-time
The Commander can accelerate the
sequence of time in contrast to the real-
time in order to make the operations on
your layout more realistic. You can adjust
the accelerating factor from 1,0 (real-time)
to 10 (model-time) infinitely variable with
the slide control.
Software-update
We are always bringing the software of the
Commander up to date. Please take a look
at our special Commander-Homepage
www.viessmann-commander.de
from time to time, to see if there are any
updates of your software version.
The update can be downloaded and
installed on the Commander afterwards.
We would be glad to inform you of new
software packages with extended operatio-
nal features. So, please register your
Commander right now at Viessmann!
Respect in any case the instructions for
the update-software.
31