Beko B7S-B7SLED Service Handbook page 86

* Machine did not
spin.
* Time
lengthened.
E18
1
0
0
1
0
*Program
terminated error
without spinning
because of
unbalanced
load
Reasons for ending the program without spinning as a result of unbalanced load
detection
1) Laundry may pile up on one side of the drum when you run your machinewith
less laundry. There is the risk of damaging the washing machine when it is
operated in higher speeds with unbalanced load. Therefore, when the unbalanced
load in the machine is calculated more than the limit value, the machine does not
spin for safety reasons.
2) Piling up of laundry at one point in the drum will be higher when the machine is
operated with a single pullover, bathrobe or towel. Avoid washing such laundry as
one piece as much as you can.
B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
Explain the customer the
following unbalanced load
Is there E18 error?
Yes
preventive actions.
86
Yes