Single Valve; Two-Way Valve; Picture 9.21 Disassembly/Assembly Of Two-Way Valve - Beko B7S-B7SLED Service Handbook

9.19. Single Valve

Upper table is removed.
-
Single valve cable terminals are removed.
-
Single Valve Hose clamp is pulled back over the hose.
-
Hose is ejected from the end on the valve.
-
At the back of the body, the tab fixing the valve to the body is pushed inside
-
with a screwdriver and the valve is turned towards left.

9.20. Two-way Valve

Upper table is removed.
-
Valve cables are removed.
-
Hose clamp is pulled back from over the hose.
-
Hoses of the two-way valve are removed.
-
-

Picture 9.21 Disassembly/assembly of two-way valve

B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
58