Disassembly Procedures; Upper Table; Rear Cover; Kick Plate - Beko B7S-B7SLED Service Handbook

Table of Contents

9. DISASSEMBLY PROCEDURES

IMPORTANT:

WHEN THE MACHINE IS REQUIRED TO BE SERVICED BY BEING TILTED TO THE

FRONT, TRANSPORT SAFETY BOLTS SHOULD BE INSTALLED. THIS IS NECESSARY FOR THE

COMPONENTS AT THE FRONT OF THE MACHINE NOT TO BE DAMAGED.

2 sheet metal screws fixing the upper table to the body are removed.

Upper table is removed by being lifted to backwards and then upwards.

5 sheet metal screws fixing the rear cover to the the body are removed.

Rear Cover is released from the tabs on the body, by being laid down and

positioned 90 degrees to the body.

Kick plate cover is removed.

The screw on the right side attaching the kick plate body to the front wall is

removed and kick plate body is pulled towards the right and removed.

Front door group Door is opened by pressing the opening button.

Body bellows clamp fixing the drum bellows to the front door is removed by use

of a special bellows clamp pliers.

B7S B7SLED WASHING MACHINE SERVICE HAND BOOK

Table of Contents

Show Quick Links

Table of Contents