Beko B7S-B7SLED Service Handbook page 32

 Some LED models with Time Delay feature:
It is achieved by assigning the Third Auxiliary Function button as Time Delay Button.
There are 3 LEDs on the button which is assigned as Time Delay and these LEDs
correspond to "3 hours, 6 hours and 9 hours" from top to bottom. Therefore, time may be
delayed up to 3 or 6 or 9 hours. When the Time Delay is started (when the "Start/Standby"
button is pressed), first the LED of set Time Delay segment is lightened, LEDs of the other
steps are turned off. When this segment comes to an end after 3 hours, LED of the one-
step-below segment is lightened and others are turned off. For example, if 9 hour Time
Delay is set, first the 9 hour step LED is lightened, 6 hours and 3 hours step LEDs are
turned off. If the set Time Delay is started by pressing the "Start/Standby" button, 9 hour
LED which corresponds to the first set Time Segment is kept on for 3 hours and the others
are turned off. After 3 hours, 9 hours step LED is turned off, 6 hours step LED is lightened
(3 hours LED remains off).
When you set Delayed Start, do not use liquid detergent! There is risk of staining
the laundry.
•
Open the door, load the laundry and fill in detergent.
•
Set the washing program, temperature, spinning speed and, if necessary, auxiliary
functions.
•
Set any time delay by pressing the Time Delay button (15).
•
Press the Start/ Pause button and the Time Delay will start to count down.
More laundry can be added during the Time Delay period. At the end of the Time Delay
countdown, the selected program will start running and the "Ready" LED turns off and the
relevant tracking LED turns on according to the first step of the started program.
Changing the Time Delay

If you want to change the time during the countdown, you can realize this in 2 ways:
Without pressing the Start/Standby button (without switching to Pause Mode):

Set the new Time Delay duration which you want to set by pressing the Time Delay
button consecutively with intervals shorter than 3 seconds. If you do not press the Time
Delay button for 3 seconds, Time Delay will be started from the last set Time Delay
(automatically without pressing the Start/Standby button).
By pressing the Start/Standby button (by switching to Pause mode):
- Press the "Start/Standby" button. Delayed Start Animation will stop in the 7Segment
models
(all three horizontal lines which are flashed in turn at the far left of the 7S display
are turned on solid at the same time). Also, the tracking LED corresponding to the first
step of the program
which is selected then turns off.
* By pressing the Delayed Start button, set the desired Time Delay.
Press the "Start/Standby" button again. In this way, time delay will start to count down
from the newly set time delay duration
. Time delay animation starts also thanks to this
(3 lines at the far left of the 7S display are flashed in turn).
Also, the Tracking LED corresponding to the first step of the program which is selected
turn on again.
Cancellation of the Time Delay

If you want to cancel the time delay countdown and start the program immediately:

You can set the time delay to zero by pressing the Time Delay button consecutively with
intervals shorter than 3 seconds (by switching to or not switching to "(Pause)" mode)
B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
32