SIP Release Notes
3.9.2
SNMP Constraints
This release includes the following known Simple Network Management Protocol (SNMP)
constraints:
1.
When configuring acSysInterfaceTable using SNMP or the Web interface, validation is
performed only after device reset.
2.
The DS3 ifAdmin-State field cannot be changed in the IF-Table, using SNMP.
3.
When setting snmpTargetAddrTagList to NULL (by removing a row in the
snmpTargetAddrTable)
snmpCommunityTable, an inconsistency occurs when a switchover occurs between
the Active and Redundant blades. In the Active blade, the object appears with a NULL
value; in the Redundant blade, a non-NULL value appears.
Version 6.2
MP-11x
Mediant 600
Mediant 800 MSBG
Mediant 2000
Mediant 3000/TP-6310
Mediant 3000/TP-8410
MP-11x
Mediant 600
Mediant 800 MSBG
Mediant 2000
Mediant 3000/TP-6310
Mediant 3000/TP-8410
without
MP-11x
Mediant 600
Mediant 800 MSBG
Mediant 2000
Mediant 3000/TP-6310
Mediant 3000/TP-8410
Product
MP-124
Mediant 1000
Mediant 1000 MSBG
Mediant 3000 HA/TP-6310
Mediant 3000 HA/TP-8410
Product
MP-124
Mediant 1000
Mediant 1000 MSBG
Mediant 3000 HA/TP-6310
Mediant 3000 HA/TP-8410
changing
the
corresponding
Product
MP-124
Mediant 1000
Mediant 1000 MSBG
Mediant 3000 HA/TP-6310
Mediant 3000 HA/TP-8410
171
3. Known Constraints
entry
in
the
December 2010