Supported Hardware Platforms; New Hardware Platforms; Mediapack 1Xx; Mediant 600 - AudioCodes MEDIAPACK VERSION 6.2 Release Notes

Sip cpe release notes   release 6.2
Table of Contents

Advertisement

1.1

Supported Hardware Platforms

This section describes the supported hardware platforms in Release 6.2
1.1.1

New Hardware Platforms

This section describes the new hardware platforms introduced in Release 6.2.
1.1.1.1

MediaPack 1xx

No new hardware platforms.
1.1.1.2

Mediant 600

No new hardware platforms.
1.1.1.3

Mediant 800 MSBG

The Mediant 800 MSBG supports the following new hardware platforms in Release 6.2:
Optional WAN Interfaces:
Symmetric High-Speed Digital Subscriber Line (SHDSL): Single SHDSL port with
the following specifications:
T1 WAN DSU/CSU:
E1/T1 copper wire line
SIP Release Notes
Four SHDSL WAN ports housed on a single R-J45 connector
Conforms to ITU G.991.2 Annexes A, B, E, F and G SHDSL
Up to 5,696 Kbps over a single wire pair
Up to 22,784 Kbps over four wire pairs bonding, according to SHDSL.bis
(ITU G.991.2 Annexes F, G)
EFM and ATM support
Wetting current support on the CPE side, according to G991.2
Supports both Central Office (CO) and CPE (wetting current on CO -
excluded)
TC-PAM 16/32 Line Code
IP over High-level Data Link Control (HDLC) and Point-to-Point Protocol
(PPP) encapsulations
PPP password authentication protocol (PAP) and challenge-handshake
authentication protocol (CHAP) authentication
Multiple IP interfaces on the T1 WAN interface
10
CPE SIP Products
Document #: LTRT-26901

Advertisement

Table of Contents
loading

Table of Contents