Management And Provisioning New Parameters; Table 1-10: New Management And Provisioning Parameter For Release 6.2 - AudioCodes MEDIAPACK VERSION 6.2 Release Notes

SIP Release Notes

1.11.6 Management and Provisioning New Parameters

The table below describes the new management and provisioning parameter for Release
6.2.
Notes:

Table 1-10: New Management and Provisioning Parameter for Release 6.2

Parameter
[SNMPEngineIDString]-
Version 6.2
These parameters are applicable to the Gateway and SBC applications.
Defines the SNMP engine ID for SNMPv3/SNMPv2 agents. This is
used for authenticating a user attempting to access the agent on the
device.
The ID can be a string of up to 36 characters. The default value is
00:00:00:00:00:00:00:00:00:00:00:00 (12 Hex octets characters). The
provided key must be set with 12 Hex values delimited by a colon (":")
in the format xx:xx:...:xx. For example,
00:11:22:33:44:55:66:77:88:99:aa:bb
Notes:
For this parameter to take effect, a device reset is required.
Before setting this parameter, all SNMPv3 users must be deleted;
otherwise, the parameter setting is ignored.
If the supplied key does not pass validation of the 12 Hex values
input or it is set with the default value, the engine ID is generated
according to RFC 3411.
Description
101
1. What's New in Release 6.2
December 2010