Fixture Test; Reset Function; Special Function - ProLights LUXOR User Manual

3.14 FIXTURE TEST

1. Press the MENU button to enter the main menu and scroll using UP/DOWN button to select Fixuture Test,
and then press ENTER button.
2. Use UP/DOWN button to select: Auto Test - Manual Test.
3. Press ENTER button to confirm the selection.
4. Press the MENU button to go back or to meet the waiting time to exit from the setup menu automatically.
Auto Test - [Auto Test] -
• In the Auto Test mode, it is possible enable check the proper functioning of the unit
• Press the button ENTER to confirm; a test programme will be executed.
Manual Test su dispositivo - [Manual Test] -
• In the Manual Test mode, it is possible run the manual test of each functions
• Press UP/DOWN button to select the effect.
• Press the button ENTER to confirm.
• Press UP/DOWN button to change the value of the single effect

3.15 RESET FUNCTION

With this function you can reset the device via the control board. You can select the different reset func-
tions through UP/DOWN button.
5. Press the MENU button to enter the main menu and scroll with UP/DOWN button to select Reset Functions
and then press ENTER button.
6. Use UP/DOWN button to select: Pan/Tilt - Shutter - Color/CMY - Gobo/Iris - Focus/Zoom/Frost/Prism - All.
7. Press ENTER button to confirm the selection.
8. Press the MENU button to go back or to meet the waiting time to exit from the setup menu automatically.

3.16 SPECIAL FUNCTION

• Press the MENU button and select through the directional buttons the [Special Function] menu voice.
• Press the ENTER button to confirm.
It is possible to view to following information
Fixture Maintenance - [Fixture Maintenance] -
• Select the Fixture Maintenance menu voice.
• Press the ENTER button to confirm.
• Select the Interval menu voice and press the ENTER button to view the time range between two
maintenance operations. Press the MENU button to go back.
• Select the Remain Time menu voice and press the ENTER button to view the remaining time.
• Press the MENU button to go back.
Factory Setting - [Factory Setting] -
• Select through directional buttons the Factory Setting menu voice.
• Press the ENTER button to confirm.
LUXOR
19