Table of Contents
Advertisement
Available languages
Available languages
4.3 GOBO WHEEL
Fixed Gobos
4.4 TROUBLESHOOTING
Problems
Fixture does not light up
General low light intensity
Fixture does not power up
Fixture does not respond to DMX
Contact an authorized service center in case of technical problems or not reported in the table can not be
resolved by the procedure given in the table.
LUXOR
Fig.11
Possible causes
No mains supply
•
Faulty fuse
•
Incorrect setting DMX
•
Lamp exhausted or defective
•
Dirty lens assembly
•
Misaligned lens assembly
•
No power
•
Loose or damaged power cord
•
Faulty internal power supply
•
Wrong DMX addressing
•
Damaged DMX cables
•
Bouncing signals
•
Rotating Gobos
Ø 17.8 mm, image Ø 12 mm
Checks and remedies
Check the power supply voltage
•
Replace a burnt-out fuse by one of the same
•
type only
Check setting DMX
•
Replace the lamp
•
Clean the fixture regularly
•
Install lens assembly properly
•
Check for power on power outlet
•
Check power cord
•
Replace internal power supply
•
Check control panel and unit addressing
•
Check DMX cables
•
Install terminator as suggested
•
21
Advertisement
Chapters
Table of Contents
